Instructions:
PENGUIN CONTAINER
Stamping
on the sides of the can:
-
Stamp penguin using StazOn Jet Black
ink - using care to place pressure onto
the stamp evenly, and allowing for curvature
of can. Stamping of penguins should
be done on the outside of the can. Repeat
as desired.
-
With sponge dauber, tap an inked Cotton
White StazOn inkpad to pick up color.
Apply white color for penguin tummies
by tapping the white inked dauber to
the inside of the can. This method allows
for the black image on the outside of
the can to remain crisp and clear.
Stamping Penguins to the metal lid:
-
Ink sponge dauber with Cotton White
StazOn and tap in approximate area where
the face and tummy will be for each
penguin.
-
Ink and stamp penguin over white area,
with StazOn Jet Black Ink
-
Tie color coordinated ribbons to pail
handle to embellish the can.
NOTE: Rubber stamps should be cleaned
with StazOn All Purpose Stamp cleaner
after use
SNOWFLAKE
CONTAINER
Stamping on the sides of the can:
-
Ink snowflake stamp on pre-inked Cotton
White inkpad. When stamping snowflakes
– stamp on the outside of the
can. Use care to place pressure onto
the stamp evenly, while rolling stamp
slightly, allowing for curvature of
can.
-
Clean rubber stamp with StazOn All Purpose
Stamp Cleaner prior to using next color.
-
Repeat stamped snowflakes with StazOn
Baby Blue.
-
Clean rubber stamp prior to using Soft
Lilac.
-
Repeat stamped snowflakes with StazOn
Soft Lilac.
-
Allow 5-10 minutes to dry and randomly
place adhesive backed faceted jewels
in centers of several snowflakes.
Stamping
Snowflakes on to the metal lid:
-
Stamp as normal, using the three colors
of StazOn Opaque.
-
Allow to snowflakes to dry and randomly
place adhesive back faceted jewels in
the centers of several snowflakes.
-
Embellish by tying color-coordinated
ribbons to pail handle.
NOTE: Rubber stamp should be cleaned
with StazOn All Purpose Stamp Cleaner
after use.
|
Container
